Raw rubber bracelet is a very popular wear accessories, many gift sellers will be through the brick glue bracelet custom way to sell their own design bracelet accessories to consumers. So when looking for a manufacturer to customize the bracelet, what processes do you need to go through?
1. Design drawings
Drawing design is generally based on the sample provided by the customer to carry out, generally using graphic drawing software, such as CDR or AI software manufacturing, if the customer can not provide samples
According to the requirements of customers, we can cooperate with customers free of charge to complete the planning and manufacturing of drawings.
2. Open the bracelet mold
The mold is the mold master according to the planned drawing out the offset plate, and then use the offset engraving copper, and finally use the copper to carve out the steel mold. Some silicone bracelet craft molds
The manufacturing technology content is relatively high, and the time is relatively long; Generally according to five days accounting opening period. The mold is available, and the production will be fast.
3. Mixing glue and color
According to the color number on the international Pantone color card specified by the customer, our color ratio is aligned with the color difference is very small
4. Verify product information
The information required for each silicone bracelet is weighed electronically, and the general weight of the bracelet is about 5.5 grams.
5. Mold production
After the mold is done, it is good to produce on the machine. After the mold is installed, the machine needs to be heated
6. Quality inspection
Quality inspection is an important part of the bracelet manufacturer before delivery, the first thing is to see if it meets the standard products, if there is any discrepancy, it will be scrapped.
7. Trim edges
Under normal circumstances, the production of silicone bracelet products are the use of molding process, the product produced by this process will have the edge, so it is necessary to manually remove the edge after shipment.
8. Quality inspection
The silicone bracelet will be produced with residual edges, and after passing the inspection by the quality inspection Department, the product will be sent to the post-process department for trimming.
9. Packing
After the products on the repaired side are checked and qualified, they will be packaged according to customer requirements. Packaging is divided into PP bag independent packaging and naked packaging two kinds. Generally according to customer requirements packing.
10. Check the box again before sealing
After the packaging is completed, the quality inspection department will check the quantity. If there is no problem, the box will be sealed and sent to the warehouse for shipment.
These are the ten processes for customers to find silicone product manufacturers to customize silicone bracelets.
