Silicone bracelet custom development has become a hot discussion of 17, with electronic design, functionality, quantum energy and other designs in recent years, and different parts in different appearance and function updates, with the rapid development of today, the definition of the bracelet is no longer a spiritual symbol, and gradually become a comfort to improve the quality of life!
Is bracelet customization really so troublesome? The answer is definitely no, the first consideration of the later consumer market for raw materials and color structure definition, in the drawing evaluation whether it can achieve the desired effect, and the most important thing to consider the silicone bracelet customization is the cost and process choice, if a low-end, but choose a complex structure and process, it is estimated that it will be more trouble!
Look at the product, see if there is anything unclean in the silicone products, or there is some deviation in the color, see whether the packaging box is complete, there are no printing errors, whether the diameter of the bracelet is regular, whether the "thickness" is consistent, and whether there is excess colloids on the edge of the bracelet. Generally, high-quality silicone products will not have rough edges or rough phenomena, and the surface is very smooth. Dongguan silicone Products
Factory, "to provide the majority of consumers with trustworthy high-quality green products." Our company adopts advanced and scientific erp management system, and has good cooperative relations with relevant institutions, laboratories, professional testing companies and well-known listed enterprises, and has established its own quality inspection system. According to the national standard, the structural adhesive must be tested before use, and can be used to confirm compatibility. Other sealants are also recommended to carry out compatibility tests before use to avoid unnecessary losses due to improper material selection.
Mixing time is not easy to be too long, when the mixture is evenly dispersed, the silicone material is completely wrapped by the roller, and the surface is smooth, the mixing can be completed. Too much time will stick to the roller. The mixing time is particularly short, and the cooling should be strengthened to keep the roller temperature low. (Low compression permanent deformation type. Mainly using vinyl silicone rubber, vinyl special organic peroxide as vulcanizing agent, when the compression rate is 30%, the permanent deformation after compression at 150℃ for 24 ~ 72h is 0% ~ 15% (ordinary silicone rubber is 20% ~ 30%).
Your message must be between 20-3,000 characters!
