Send Message
Xiamen Juguangli Import & Export Co., Ltd
products
news
Home > news >
Company News About Mold maintenance is important to the production and processing of silica gel products
Events
Contacts
Contacts: Mr. Derek.Cheng
Fax: 86-592-5536328
Contact Now
Mail Us

Mold maintenance is important to the production and processing of silica gel products

2022-11-28
Latest company news about Mold maintenance is important to the production and processing of silica gel products

A high-quality product without continuous maintenance of the mold in the case of long-term production may lead to a lot of problems, so the maintenance of the mold naturally indispensable.

When the mold of silicone products manufacturer is used for a long time, we need to do some maintenance. This can not only extend the life of the mold, but also help us not suffer from any obstacles in the process of use. It can also reduce the cost of repairing the mold and the loss caused by missed work.

1. In the usual use, we should pay attention to check whether the various moving parts of the mold can operate normally every day, and whether the exhaust holes and waterways are blocked by silica gel products. This is the most crucial step to protect the mold when it is flat. Because the silica gel waste is blocked for a long time without any gap and air, the oil can not be fed, which leads to the probability of mold rust!

2. In addition to daily protection, regular inspection of the mold can not be ignored. Check whether the mold screw is loose, whether the wear plate is damaged, whether the spring can be normally elastic and so on.

3. When the production of the mold is stopped for a period of time, we should do a good job of cleaning the mold. Keep the mold closed to prevent mold rust. And pack the mold and put it in the box. In fact, the maintenance method is very simple, as long as we pay more attention to it when we use it at ordinary times. However, these daily actions are generally carried out by silicone rubber products manufacturers once a month for mold maintenance. If the mold is not maintained for a long time, it will cause mold loss and poor product production in the second production.