Aging life is the hard wound of the silicone ring, all suitable for the sealing benefits of silicone products have such a disadvantage, such as our common machine doors and Windows, electrical product sealing and car waterproof sealing ring in the middle of the city found the inevitable shortcomings, regardless of the choice of silicone or rubber and other materials through the situation and the training of time are gradually lost efficacy can not reach the reality Fruit, showing the benefits of not producing things.
There are many important reasons that affect the application life, but the silicone ring will be affected by several common signs in the service seal.
Affected by the strength of the roughly shrinkable permanence, According to the different method of placement, plane, rugged groove or groove, etc., the difference in the placement method of each product is very likely to cause the uneven force to find the force center shift, and the discovery side is heavy The edge light causes shrinkage permanent deformation through the permanent accumulation force, and when the sealing silicone ring is removed again, it is very likely that the shape situation has been found, so the average and the level of the force need to be mastered at the same time.
The product size is wrong resulting in fracture deformation
The gap question can be divided into several components, first, because of the material of the rubber material question, very many silica gel material because of the formula found poor resilience, tensile force is not enough to cause the problem in the application process is not strong enough to find cracks caused by leakage, Silica gel ring and manufacturers processing questions: for example, the product is brittle resulting in the relatively thin thickness of the silica gel product, it is easy to find this question, and the product is soft causing the rubber material to have an internal bulge, and the deformation of the cracks is found after stretching and compression forever.
The product is soft or brittle resulting in ineffective effect, very often not the layout of the material and the product, but in the middle of the silicone rubber product manufacturer manufacturing process caused by the product character specifications are affected, such as the hardness and softness of the final product when processing, the processing time is extended resulting in the product is too brittle in the process of installation found cracking signs, and probably want to be promoted The product is found to be soft, resulting in deformation signs when the product is stressed.
Hard and soft influence, very often based on the difference in the softness of silicone rubber products can completely change the efficacy and layout of the product, so the silicone sealing ring in the application process because of the selection of different hard and soft in the force, Tensile, extrusion and other signs are found, the sealing ring will find a few unavoidable questions, such as extrusion cracks, excessive strength, high hardness, product deformation without rebound and so on.
Your message must be between 20-3,000 characters!
