We all know that the processing works with silicone as the main raw materials are called silicone products. Silicone products are now widely used in medical, automotive, life, electronic appliances, so why do you need to sample mold such a step when making silicone products?
First of all, when the silicone mold is made, the special steel material for the mold is used, and the size of the template is determined according to the size of the product. Usually relatively simple products generally from programming to processing is about 2-3 days, complex is about 5-7 days, the more complex the product structure, the longer the mold opening time.
Generally, when you want to make a large mold, why should you first open the sample mold instead of directly opening the large mold? First, the number of holes in the sample mold is small, the use of the template is less, and the processing time is short, so that the cost is relatively small and the efficiency is high. Secondly, the opening of the sample mold can also bring some other benefits, such as: even if the product structure is not confirmed for the first time, it is more convenient to modify the mold, and the sample can be confirmed immediately after modification, which shortens the time. Third, because of the low cost, the first opening of the sample mold can reduce the risk, so in the cooperation with the customer, the first opening of the sample mold for the customer to confirm, the customer thinks that there is no problem, and then open the large mold can be mass production.