80 Shore A Custom Molded Silicone Rubber Keypad for Remote Control 4x4 Matrix Waterproof

80 Shore A Custom Silicone Rubber Keypad for Remote Control

Waterproof 4x4 matrix silicone rubber keypad, compression molded to your drawing with OEM logo, color and epoxy coating options.

Application Scenarios

• Remote controls for TV, air conditioner and set-top boxes
• Industrial handheld controllers and measuring instruments
• Medical and laboratory equipment front panels
• Access control, intercom and security keypads
• POS terminals, vending machines and home appliances

Simple Parameter Table

Quality Assurance

Every keypad batch is produced under an ISO 9001:2015 certified quality system and inspected against a documented control plan before shipment.

• 100% force-displacement travel test and contact resistance check on each cavity
• Raw silicone compound verified per batch: hardness, tensile strength and compression set
• IP65 waterproof sealing and UV-stable pigment validated with a 500-hour aging test
• Full dimensional report, RoHS/REACH and SGS test reports available on request

Packaging Specifications

Each keypad is cleaned, dust-free packed in a PE bag, laid in an anti-static tray and sealed in an export-grade corrugated carton. Cartons are moisture-barrier lined and palletized for sea freight. Custom retail boxes, barcodes and drop-test compliant packaging are available on request.

After-Sales Service

• 24-hour engineering response for technical and application questions
• 12-month warranty against manufacturing defects; free replacement of nonconforming parts
• Free 3D drawing and sample tooling review before mass production
• Long-term supply protection: molds stored for 10 years, repeat orders without tooling cost

Factory Scale

• 18,000 m² manufacturing base with 6 vacuum compression molding lines
• Monthly capacity over 2,000,000 pcs, 120+ skilled production staff
• In-house mold workshop, CNC engraving and LSR injection capability
• Dedicated 4x4 keypad production cell with automated compression molding and CNC engraving

FAQ