Waterproof OEM Conductive Silicone Rubber Keypad for Medical Device 30 Shore A Backlit

Waterproof OEM Conductive Silicone Rubber Keypad for Medical Device

Waterproof conductive silicone rubber keypad with 30 Shore A soft-touch keys and optional LED backlight, engineered for medical and instrument control panels.

Application Scenarios

• Medical monitors, infusion pumps and diagnostic devices
• Laboratory and analytical instrument panels
• Industrial control panels and rugged handhelds
• Automotive and marine control interfaces
• Telecom and intercom backlit keypads

Simple Parameter Table

Quality Assurance

Every keypad batch is produced under an ISO 9001:2015 certified quality system and inspected against a documented control plan before shipment.

• 100% force-displacement travel test and contact resistance check on each cavity
• Raw silicone compound verified per batch: hardness, tensile strength and compression set
• Biocompatible silicone compound tested to ISO 10993 and validated for ethylene oxide sterilization
• Full dimensional report, RoHS/REACH and SGS test reports available on request

Packaging Specifications

Keypads are packed in anti-static bags, separated by foam trays and sealed in clean-room grade cartons with desiccant. ESD-safe labeling and traceable lot numbers are provided, and packaging can be qualified for your sterilization and clean-room workflow.

After-Sales Service

• 24-hour engineering response for technical and application questions
• 12-month warranty against manufacturing defects; free replacement of nonconforming parts
• Free 3D drawing and sample tooling review before mass production
• Long-term supply protection: molds stored for 10 years, repeat orders without tooling cost

Factory Scale

• 18,000 m² manufacturing base with 6 vacuum compression molding lines
• Monthly capacity over 2,000,000 pcs, 120+ skilled production staff
• In-house mold workshop, CNC engraving and LSR injection capability
• Clean-room molding area for medical silicone, in-house conductive carbon pill printing line

FAQ