Anti Vibration Rubber Feet Pads with 3M Adhesive Backing
40 Shore A EPDM or silicone pads · 0.5–15 mm thickness · 3M 468 / 9080A PSA backing · die-cut to any shape · non-slip, non-staining, vibration damping · 3,000,000 pcs monthly capacity.
1. Product Features
Rubber feet pads are die-cut from compression or injection moulded sheet and supplied with a pressure sensitive adhesive backing. Thickness, hardness and adhesive grade are tuned so the pad stays bonded for the service life of the equipment it is mounted on.
- Vibration damping — 40–50 Shore A compound absorbs motor and compressor vibration, reducing structure-borne noise and preventing screws from loosening.
- Anti-slip and anti-walk — high friction surface keeps equipment in position on tile, laminate, steel and glass surfaces.
- Surface protection — cushioning layer prevents scratches, dents and marks on floors, desks and stacked panels.
- Non-staining formula — phthalate-free, low-migration EPDM and silicone compounds will not discolour light flooring or powder-coated parts.
- Clean adhesive mounting — 3M PSA backing bonds without drilling or screws, and can be applied by hand or by automatic placement equipment.
- Long service life — compression set below 20% after 22 hours at 70 °C keeps the pad thickness and damping performance stable over years of use.
2. Specification Parameters
Standard capability window below. Every dimension, colour and adhesive grade can be customised to your drawing.
| Material | EPDM, silicone, NBR or NR/SBR blend, RoHS and REACH compliant, non-staining |
| Hardness | 30–70 Shore A (standard 40–50 Shore A for anti-vibration) |
| Thickness | 0.5–15 mm (multi-layer lamination up to 25 mm available) |
| Size range | 3–100 mm diameter or square, tolerance ±0.15 mm |
| Shape | Round, square, rectangular, hemispherical, tapered, bumper, custom die-cut |
| Adhesive | 3M 468MP, 467MP, 9080A, 9448A or customer-specified PSA, peel strength above 1.5 N/cm |
| Surface | Smooth, fine orange-peel texture, fabric-backed, or EVA foam laminated |
| Working temperature | -40 °C to +120 °C (EPDM), -40 °C to +200 °C (silicone) |
| Compression set | Below 20% after 22 h at 70 °C |
| Colour | Black, grey, transparent, white, or any Pantone shade |
| Certification | RoHS, REACH, PAH-free, phthalate-free, SGS test report on request |
| MOQ | 2,000 pcs per size (stock thickness), 10,000 pcs for special die-cut shapes |
3. Quality Assurance
Incoming compound, moulded sheet, die-cutting and adhesion are controlled as four separate checkpoints, and every carton leaves with a batch traceable report.
Material and compound control
Each compound lot is tested for hardness, specific gravity, tensile strength and elongation before release. RoHS and REACH declarations are filed per batch and can be issued with the shipping documents.
Moulding and die-cutting
Sheet thickness is gauged every 30 minutes on a dial gauge; die-cut parts are checked for diameter, thickness and burr against the approved drawing at the start of each run and every 2 hours thereafter.
Adhesive performance
Peel strength is verified on a tensile tester against glass, ABS and powder-coated steel substrates. Samples are also aged 72 hours at 60 °C to confirm no adhesive creep or edge lift.
Final inspection
AQL 0.65 major and 1.5 minor per ISO 2859-1 on dimension, appearance, adhesive coverage and colour. A 3.1 inspection report plus SGS or TUV third-party reports are available on request.
- Certification support: ISO 9001:2015 quality system, RoHS, REACH, PAH and phthalate-free test reports.
- Traceability: each carton is labelled with batch number, compound lot, die number and inspection date.
- Free samples: stock sizes are shipped free of charge within 3 working days for your adhesion test.
4. Packaging Standards
| Inner packing | Adhesive face protected by release paper; parts packed in anti-static PE bag, 500–2,000 pcs per bag |
| Protection | Carton lined with PE film to prevent dust and moisture during sea freight |
| Inner box | 5-layer corrugated carton labelled with size, hardness, adhesive grade and quantity |
| Outer carton | Export-grade 5-layer master carton, strapped, 18–25 kg gross |
| Carton marking | Shipping mark, gross and net weight, carton number, made-in-China mark as required |
| Pallet | 1200 × 1000 mm fumigation-free plywood pallet, stretch-wrapped and banded |
| Custom options | Customer logo bag, colour box, barcode or QR label, retail-ready blister card |
| Storage | Store at 5–30 °C below 70% RH; keep release paper on until application; shelf life 24 months |
5. After-Sales Service
- Response commitment: technical enquiry answered within 8 working hours; quotation with drawing review within 24 hours.
- Tooling warranty: die or mould warranted for 12 months or 1,000,000 shots, whichever comes first.
- Adhesion guarantee: if a confirmed batch fails the agreed peel strength, we replace the goods free of charge or credit the next order.
- Defect handling: claims accepted within 90 days of arrival with photo evidence and batch number; replacement ships with your next order or by air.
- Logistics support: EXW, FOB, CIF and DDP terms; booking, consolidation and export documents (invoice, packing list, CO, Form A / FTA) handled in house.
- Engineering support: free DFM advice within 2 working days on pad size, hardness selection and adhesive grade for your substrate.
6. Factory Scale
Our plant in Xiamen, Fujian covers the full chain from compound mixing and moulding to die-cutting, adhesive lamination and export packing, which keeps lead time and quality under one roof.
12,000 m² Production area | 45 sets Moulding presses | 8 lines Die-cutting lines | 3,000,000 pcs Monthly capacity |
| Located in | Xiamen, Fujian Province, China — own plant since 2009, 15 years in rubber moulding and die-cutting |
| Workshop | 12,000 m² with separate mixing, moulding, die-cutting, lamination and packing areas |
| Equipment | 45 compression and vacuum moulding presses (25–300 T), 8 rotary and flatbed die-cutting lines, 3 lamination lines |
| Tooling shop | In-house CNC, laser and water-jet tooling workshop, new die ready in 5–7 working days |
| Workforce | 120 staff, including 3 rubber engineers and 6 QC inspectors |
| Monthly capacity | 3,000,000 pcs of die-cut pads and 60,000 m² of moulded sheet |
| Quality system | ISO 9001:2015 certified, in-house tensile, hardness and ageing laboratory |
| Export coverage | Shipped to more than 40 countries across Europe, North America, Japan and Australia |
7. FAQ
What is your minimum order quantity?
2,000 pcs per size for stock thickness and standard shapes; 10,000 pcs for a special die-cut shape. Mixed sizes can be combined in one order to reach the MOQ.
How thick should the pad be for my equipment?
For units up to 5 kg, 1–3 mm is usual; for units above 20 kg or fitted with a running motor, 5–10 mm with 40–50 Shore A is recommended. Send us the unit weight and we will recommend a thickness.
Which adhesive grade do you recommend?
3M 468MP for high shear on metal and ABS, 9080A for general purpose and low surface energy plastics, 9448A for temporary or repositionable bonding. We can laminate customer-supplied adhesive tape as well.
Can you die-cut to our drawing?
Yes. We accept DWG, PDF, AI or DXF files and return a die drawing for approval. New dies are ready in 5–7 working days, and the die cost is refundable against 50,000 pcs.
What is the lead time?
Stock sizes ship in 3–5 working days. Custom die-cut parts take 7–10 days for die making plus 10–15 days for production. Repeat orders ship in 10–12 working days.
Do the pads leave marks on floors or equipment?
Our EPDM and silicone compounds are non-staining and phthalate-free, so they do not migrate into parquet, laminate or powder-coated surfaces. A low-migration grade is available for light-coloured flooring.
What payment terms do you accept?
T/T 30% deposit with 70% before shipment, L/C at sight, Western Union and PayPal. Die cost is paid 100% in advance.
Send your drawing, get a quotation within 24 hours
Tell us the diameter, thickness, hardness, adhesive grade and annual quantity. We reply with a DFM review, unit price, die cost and delivery schedule. Free stock samples are available for your adhesion test.
Your message must be between 20-3,000 characters!
